3M™ 7725SE Scotchcal™ ElectroCut™ Graphic Film
FDC 7725SE is 3M™ 7725SE Scotchcal™ Electrocut™ Graphic Film. These are pressure-sensitive films designed for permanent graphics. Use these films to create unique, special effect films.
FDC 7725SE is 3M™ 7725SE Scotchcal™ Electrocut™ Graphic Film. These are pressure-sensitive films designed for permanent graphics. Use these films to create unique, special effect films. The transparent dusted crystal film and the five colors of frosted crystal film have transparent synthetic liners, which resist moisture absorption and static buildup for easier cutting and assembly, and are intended only for cut graphics. The fluorescent films, available in six colors, have a paper liner and can be screen printed or electronically cut. To order punched material, use part number 7775.
Additional information
| Brand | 3M™ |
|---|---|
| Series | 7725SE |
| Subcategory | Transparent |
| Laminate | Cold |
| Application Temperature | 40 |
| Interior / Exterior | Interior and Exterior |
| Solvent | N/A |
| Shelf Life | 3 Years |
| Sheetable | Yes |
| Computer Cut | Yes |
| Screen | N/A |
| Wet Apply | Yes |
| Flat Bed | Yes |
| Eco Solvent | N/A |
| UV Inkjet | N/A |
| Thermal Transfer | N/A |
| Steel Rule | Yes |
| Film Technology | Cast |
| Film Thickness | 2.0 – 3.25 |
| Finish | Dusted/Frosted/ Fluorescent |
| Blockout | No |
| Outdoor Durability | 1-3 Years |
| Adhesive | Permanent/ Clear (Exceptions Noted) |
| Liner | Trans. Synthetic/K. Paper |
| Conformability | Flat surfaces and simple curves |
Roll Sizes
Part No. Roll Size
-6015 60"x50Yds
-6003 60"x10Yds
-4815 48"x50Yds
-4803 48"x10Yds
-3615 36"x50Yds
-3603 36"x10Yds
-3015 30"x50Yds
-3003 30"x10Yds
-2415 24"x50Yds
-2403 24"x10Yds
-1515 15"x50Yds
-1503 15"x10Yds
Colors
Fluorescent Series (Standard):
Dusted/Frosted Series (Standard):
Colored Frosted Series (Standard):
Resources
Resources
Part Number
HOW TO BUILD A PART NUMBER
0000-0000-000
THE FIRST FOUR DIGITS in our part numbers identify the series of products and determine the converting process. Increasing the non-perforated product number by 50 identifies most Perforated products.
THE SECOND FOUR DIGITS identify the material converted size. The first two digits indicate the width and the last two digits indicate the length.
THE FINAL THREE DIGITS identify the color and all colors contain three digits.
