Lumina® by FDC 3000 Intermediate 20# Drawing and Pounce Media Paper
Lumina 3000 Series Intermediate 20# Drawing and Pounce Paper – This product is ideal for hand painted signs or stencils, and Cad pen plotters. Some vinyl cutter-plotters can use a pounce tool to create desired computer-aided designs.
Lumina 3000 Series Intermediate 20# Drawing and Pounce Paper – This product is ideal for hand painted signs or stencils, and Cad pen plotters. Some vinyl cutter-plotters can use a pounce tool to create desired computer-aided designs. Other methods would be using a plotter pen to draw the computer-aided design and then using a hand tool with a star wheel to punch holes through the paper. Pounce powder would then be used to transfer the design onto given substrate. To order punched material, use part number 3050.
Additional information
| Brand | Lumina® by FDC |
|---|---|
| Steel Rule | N/A |
| Application Temperature | N/A |
| Interior / Exterior | N/A |
| UV Inkjet | N/A |
| Shelf Life | N/A |
| Thermal Die | N/A |
| Sheetable | N/A |
| Screen | N/A |
| Laminate | N/A |
| Wet Apply | N/A |
| Solvent | N/A |
| Eco Solvent | N/A |
| Computer Cut | N/A |
| Thermal Transfer | N/A |
| Flat Bed | N/A |
| Series | 3000 |
| Film Technology | Bond Paper |
| Film Thickness | 20 |
| Finish | Matte |
| Blockout | N/A |
| Outdoor Durability | N/A |
| Adhesive | N/A |
| Liner | N/A |
| Conformability | N/A |
| Subcategory | Specialty |
Roll Sizes
[table “” not found /]
Colors
Resources
Resources
Part Number
HOW TO BUILD A PART NUMBER
0000-0000-000
THE FIRST FOUR DIGITS in our part numbers identify the series of products and determine the converting process. Increasing the non-perforated product number by 50 identifies most Perforated products.
THE SECOND FOUR DIGITS identify the material converted size. The first two digits indicate the width and the last two digits indicate the length.
THE FINAL THREE DIGITS identify the color and all colors contain three digits.
