3M™ 3735 Light Management Films – Envision™ Diffuser Films
FDC 3735 Series is 3M™ 3735 Light Management Films – Envision™ Diffuser Films. These films provide light diffusion when applied either first or second surface to internally-illuminated signs.
FDC 3735 Series is 3M™ 3735 Light Management Films - Envision™ Diffuser Films. These films provide light diffusion when applied either first or second surface to internally-illuminated signs. This film may also be thermoformed and is uniform in both reflective and transmitted light. Typically for best results, 3M recommends using series 3730 for LED applications. To order punched material, use part number 3785.
Additional information
| Brand | 3M™ |
|---|---|
| Laminate | Cold |
| Application Temperature | 60 |
| Interior / Exterior | Interior and Exterior |
| Steel Rule | Yes |
| Shelf Life | 3 Years |
| Thermal Die | Yes |
| Sheetable | Yes |
| Computer Cut | Yes |
| Screen | Yes |
| Wet Apply | Yes |
| Solvent | N/A |
| Eco Solvent | N/A |
| UV Inkjet | N/A |
| Thermal Transfer | N/A |
| Flat Bed | Yes |
| Series | 3735 |
| Film Technology | Cast |
| Film Thickness | 2 |
| Finish | Matte |
| Blockout | No |
| Adhesive | Permanent / Clear |
| Outdoor Durability | 5-7 Years |
| Liner | 78# White Kraft Paper |
| Conformability | Flat Surfaces |
| Subcategory | Translucent |
Roll Sizes
Part No. Roll Size
-4815 48"x50Yds
-4803 48"x10Yds
Colors
Colors
Resources
Resources
Part Number
HOW TO BUILD A PART NUMBER
0000-0000-000
THE FIRST FOUR DIGITS in our part numbers identify the series of products and determine the converting process. Increasing the non-perforated product number by 50 identifies most Perforated products.
THE SECOND FOUR DIGITS identify the material converted size. The first two digits indicate the width and the last two digits indicate the length.
THE FINAL THREE DIGITS identify the color and all colors contain three digits.
